The Hub

I have some one with a double neck 6 sting/ bass who wants to wire a stereo jack to split the guitar to one amp and the bass to another amp. Before I give up does anyone have knowledge of how to do this? My skill set for electric guitars is- I can solder and follow a wiring diagram, and that's it.

Hi all, I'd like to get some input on how to address this top blowout. For starters I own this, I got it as a project guitar, 71 D28. I'm not as experienced with acoustics as electrics and this is a big project but I got it to learn new skills and I'm confident I can do it with guidance. It had been stored in the case for many years under tension and was way too humidified. The bridge had pulled up I assume in stages. The center seam se…

After several years of fighting with my bandsaw blade jumping off every few inches of cut (it needs a new bearing on the top wheel), I decided to try something bass-ackwards. I put the blade on with the teeth facing the 'wrong' direction. Not only did that solve the problem of the blade jumping off, but it has made the cutting of pickguard material much smoother. Has anyone else experienced this kind of situation? Do you have any other…

Hello Luthiers and Guitar Builders,We manufacture and supply high-quality natural bone Guitar Nuts and Saddles in custom sizes for acoustic, electric, classical, and bass guitars.What We Offer:• Custom-sized Bone Nuts & Saddles• OEM & Bulk Orders• Precision Cutting & Finishing• High-Density Natural Bone Material• Consistent Quality• Worldwide ShippingWhether you need a single custom specification or bulk production for your workshop or…

At what point do you tell a customer that their acoustic instrument needs a bridge reglue? Do you do it when the corners are just barely starting to lift? Once it has begun to affect playability/tuning stability? Do you offer half-measures to save them money when the damage is not too bad (dripping in some thinned tite bond instead of removing the bridge entirely for example)? I ask this because a Godin acoustic bass just came across my…

Hello all! My name is Jake and I run a repair shop out of my NYC apartment. I am looking for someone who's experienced in CAD to help me with a project. I am working on a 5 string headless bass build for a customer. The neck & body are to be CNCed by a local mill here in Brooklyn, NY. I have a 2D design (PDF and CRD), but I need help making some modifications, as well as translating it to 3D. Pay is negotiable. I will basically pay whate…

Hi friends, I just stumbled upon a 1966 P-Bass, nearly completely original. The owner bought it in 1971 and it had already been stripped of its original finish. That was a thing back then. You can guess that 55 years of gigging had the wood absorb much of the owner’s DNA and sweat. Maybe a few beers as well. Surface was quite tacky as you can expect. I cleaned it with naphta and StewMac’c brand-new cleaner (quite a great product I'd say…

Hello, I hope everyone is having a great 4th of July weekend so far. I was recently asked by a friend to work on a cheap S101 bass someone had given to him. It had no electronics and it was severally back bowed. After finishing up the electronics, I did the set up. He wanted the guitar tuned low, to Drop C. So, I went out and bought some Ernie Ball Power Slinkies 55-110. Once I got to the nut depth check, it was clear there were large, g…

Sadowsky use unique control plate screws which are much smaller than common plate screws. I believe the ones they use are: #3 × 3/8" Phillips Pan(domed) Head Black Oxide csk self tapping Sheet Metal Screw Type AB thread. Being in the UK, these are really hard to find, pretty much don’t exist here, so can anyone please help me or point me in the direction of a supplier? I’ve contacted Sadowsky direct with no response and also many of my main…

Since most of us fix or make guitars, we have probably heard something about the cease and desist letters Fender has sent out concerning the Stratocaster. I thought I would offer some thoughts. As always, caveat emptor. There are three basic ways to protect intellectual property under Federal law. Patent, trademark, and copyright. Each protects different things, and has different underlying legal theories. Lets begin with pate…

Hi all, I am a newer guitar tech and after dozens of repairs this particular Simon & Patrick Luthier Cedar top SP6 acoustic dreadnought from the 90-ies with a bolt-on maple neck has been an incredible challenge. It came with a maxed out and stuck truss rod with a considerable up bow in the neck, extremely low saddle with barely any string break angle, so it needed a neck reset. Later on I figured out that it also has a pretty dras…

I have a "fender", which I believe is a knock off, in my shop. I didn't immediately catch that it was a fake, but as I worked on it it's become fairly undeniable, in my opinion. For the neck — the fretboard is made from two pieces of rosewood, the headstock decal doesn't look right, the truss rod is metric, the tuners don't look like a MIA Fender, and there's no walnut plug on the truss access. The model name being wrong is suspicio…

Hi Folks Newbie here so please bear with me. I have a lovely early 90's Yamaha LD-10E acoustic in for repair, I think all solid wood? made in Indonesia and a lovely sounding instrument, however the electrics are letting it down. The pre-amp has a PCB populated with SMD electrolytic caps. Many of these have leaked and destroyed the PCB pads underneath. Repairing the traces is nigh on impossible so it looks like I'll have to replace t…

Hey everyone, I'm a technician at a music production school in London. As the most 'guitariest' technician on staff, I've become the de facto guitar maintenance person. A big part of my work is taking a look at each guitar once a week. Usually my "routine" is to check action and intonation, making adjustments if needed, then cleaning/polishing. The thing I struggle with the most is getting strings feeling good. We use D'Addario…