The Hub

Friend brought his "old guitar in the basement" over for me to have a look at. Long story short, it's a 1945 D-18, it's all original and it's a beauty. He had no idea. I explained to him that it was worth somewhere between 15 and 25 thousand bucks, that it needed some fairly routine repairs and that he should get - among other things - an insurance rider and take a little more care of the guitar than he has been. Picture attached for fu…

Thought fellow looths might enjoy this geekery. I've often wished for custom size heating blankets, but didn't even try uploading the file to get a quote from some of the major manufacturers. I was looking to spend countless hours of my life on something and save a hundred bucks. So I did some research, a little bit of head scratching, a slight bit of math reckoning, and made this '70s Martin bridge plate remover. Pretty slick, nice…

This question is best directed to Dan Erlewine, since he has figured out how to match the blue color paint. I got this 1969 Buck Qwens American in the shop after the owner’s Mother-in-law left it on a guitar stand in front of a window in the Phoenix area.. for 50 years. It came in just a bit melted and warped. As the discussion progressed I learned the owner wants it to play and look like it did when (he says) Buck gave this guitar to hi…

Like many of us, I work in a small space - a quarter basement with maybe 6 -1/2 feet of headroom. Sawdust is a problem. There’s no room for an extensive ductwork system or a blower setup. My shop tools (bandsaw, drill press, vertical belt sander, etc.) have a 1-1/2 inch connection for vacuum, but I have mostly been too lazy to use them. (note that I finally added a portable shop air cleaner with HEPA filters). When the most recent Wo…

61 year old Stella Harmony with brass frets. Fret board is poplar. It needs refretting and I want to try doing it myself given the cost of the guitar was $70 bucks, hiring a pro will cost way more. Any recommendations on Fret wire? I can't find Fret wire that is an exact match. Current frets are 1 mm wide, a hair over 1 mm high and the tang looks to be 2.5 mm deep. Has anyone regretted one of these guitars?

First time here on the forums, not sure how often I'll check in, but thought this the best place to post it. Was playing with an idea proposed by Buck Van Laarhoven on a parametric model for bolt-on neck shims, and found the formulas I wrote up translated easily to Taylor and conventional acoustic neck joints so decided to add boxes for those as well. I'm not well versed in Google Sheets, but couldn't see a way to upload the file direct…