Acoustical Part staging and other 3x3 heads "tray".
A place to let the load off.
The models neck shaft is a 1:1 of a
1_13/16 Nut
2_3/8th Saddle Spacing
25.34" Scale Length
4 degree peghead angle to keep the thing low profile... its over sized, and the "fingerboard" has extra compensation.. should fit em all..
I printed with PLA,
.6mm Nozzle
0.18mm layer Height
2 walls
15% Gyroid infill
0.2 / 0.2 Fuzzy Skin Outer Wall.
~4 hours
I recommend Matte PLA and this setting, comes off the bed with the layer lines hidden intentionally.
Clearances are deliberately loose, oversized for compatibility.
I only have hipshot hardware on hand for my Electricals, a comfortable amount of play
Cheers!