The Hub

The Artisan Guitar Show this weekend gave me a kick in the behind to get back to more promoting of the builds I'm doing. Here's my first try doing multiply binding, and it turned out pretty well

Need some guidance for binding repairs. I'm using the "Martin method" using CA glue and tape for re-attaching the binding. From there: Scrape glue 400 grit to level Brushing on Lacquer 400 grit to level Meguiars #1 Meguiars #3 Meguiars #7 All by hand. But I recently purchased a Proxxon hand polisher. I'm still getting big marks. Its usually "ok", but I'm noticing huge swirls. Not pro. I do not have the money/space for…

For those of you who regularly do semi-hemispherical frets -- how long do you make your frets? Specifically for a bound fretboard (although I suppose this would apply to either bound or unbound) do your frets come up a little short of the outside edge of the binding? And if so, how much gap do you leave? I did my first semi-hemis on a new build and made them end flush with the outside edge of the bindings, but it doesn't feel right.…

Hi -- I am planning to have a maple Thinline Tele top painted by an automotive paint shop. They've made a glossy and a matt sample for me and it looks great. I wonder if anyone has any experience with this, and specifically: - if I bind the top first, will the paint stand very proud above the binding once I scrape the paint off the binding? - the matt looks terrific, but it looks like it will burnish and get shiny in spots or line…

I'm replacing the top on an old Stella with white painted "binding." Wondering what kind of paint I should use to come close to the original and be stable under finish. Images

Hello, I accidentally sawed through a binding during a refret. Any suggestions? Thanks!

I'm reading the Design book of the Gilet/Gore set (2nd Edition) and ran across something that surprised me. Under "Top bracing layout - guidelines" (Section 4.4.8, pp 4-52) Gore writes, "Brace ends that are housed into the linings stiffen the edge of the soundbard considerably and so constrain its mobility. Unless you are chasing a particular effect, it is generally not very beneficial to house the lower bout braces into the linings." My…

Hello everyone, I use a Stewmac japanese fretsaw (which produces .023" wide fretslots, matching the width of the tang of stewmac wire) to recut my slots on refrets. The saw does a good job making the slots deeper, but struggles to make them wider and binds like crazy throughout the process. I think that is due to it not having enough (or any) set, so in theory it only cut downwards and does a poor job removing material from the slot wall…

Looking for some guidance here – I have a 1973 Jazz Bass with maple fretboard and fretboard binding in for a re-fret. The finish is of course built up thick and crackly along the frets, and although they’re not seated too nicely, the first few came out really tough and chippy even after scoring the finish really well. I’m aware that Fenders were fretted sideways until 1982, but because of the binding, pushing them out sideways is not an…

New Youtube video tutorial on how to thoroughly repair Martin Binding failures.

I had someone comment on my Instagram page that they are having trouble finding anyone to do a Martin binding repair for them. I told him I'd post something here. Please comment if you would do that and I'll send your info to him.

Im going to attach some photos of a 000-style guitar from Potomac(I believe an Eastman product) that has some top cracks and deformation around the neck block from what I assume to be a shift of the neck block. How do you all approach repairs like this. Im thinking that pulling the neck and somehow pushing the block back into place from the inside is about the right course of action, but if anyone has some advice, Id appreciate it! In th…

Question for the group.. Let's say you start with a new nut blank and leave it too tall, but cut the slots to the proper depth. So you are left with a scenario where the strings are fairly buried in the nut (not protruding from the top), would that affect playability or just potentially cause binding issues and look bad? Thanks, James

So, I've seen people having to deal with crappy binding glue on newer Martin's. I have a D35 at 50 (2015) and the purfling has separated from the guitar body all the way around both the top and bottom of the guitar due to heat. Not only that but the binding has separated from the purfling in spots. The glue is still tacky and it's almost like a thick stain as it has impregnated the top and sides, making it impossible to completely rem…

In the process of evaluating the repairs needed on this guitar I checked to see if the truss rod was working. There is hole in the transverse brace where you would normally insert a truss rod, but all I see is the end of a metal bar with a smallish hole in the center. I tried several allen wrenches that would fit in the hole, but nothing seems to grab. Did they really eliminate the adjustable truss rod on this vintage reproduction? Here'…